Dahua HCVR5104C User Manual page 324

Step 3 Click Apply or Save to complete setup.
4.1.4.3 P2P
You can add a device via the client on the cellphone or the platform.
You can use your cell phone to scan the QR code and add it to the cell phone client.

Go to the P2P management platform, via the SN from scanning the QR code, you can

access the device in the WAN. Please refer to the P2P operation manual.
Besides startup
menu->Setting->Network->P2P, you can also go to the P2P interface. See Figure 4- 19.
Check the box to enable P2P function, and status is online. Cell phone or the platform can
add and access the device.
Figure 4- 18
wizard and configuration wizard, from main
308