4.9.2.7 Sync Time
This function allows specified IP host to change device time in case several hosts are
syncing time with the device.
Step 1
From main menu->Setting->Network->Sync time.
Enter Sync time interface. See Figure 4- 125.
Step 2
Check the box to enable Sync time function.
Step 3
Refer to chapter 4.9.5.10 Security for setup information.
Step 4
Click Apply or Save to complete setup.
Note
If the DVR has enabled NTP service, the device will sync time with the NTP server
regularly. The sync or change time operation of the IP address in the whitelist will be
invalid, unless the NTP server and the IP address in the whitelist is the same.
4.9.2.8 Email
The email interface is shown as below. See Figure 4- 126.
SMTP server: Please input your email SMTP server IP here.
Port: Please input corresponding port value here.
User name: Please input the user name to login the sender email box.
Password: Please input the corresponding password here.
Sender: Please input sender email box here.
Figure 4- 125
396