Step 10 Click Finish to complete the initialization.
4.1.4.4.2 Auto Add
Step 1
Click IP Search, device displays searched results.
Step 2
Double click an IP address or select an IP address and then click Add button, it is
to register the device to the DVR. Device supports batch add.
4.1.4.4.3 Manual Add
Step 1
Click Manual add to register the camera manually. There are three modes:
TCP/UDP/Auto. The default setup is TCP. See Figure 4- 28.
Step 2
Input the corresponding value and then click OK button.
Note
This series product supports the IPC from many popular manufactures such
as Sony, Hitachi, Axis, Samsung, Dynacolor, Arecont, Onvif and Dahua.
System default IP address is 192.168.0.0 if you do not input IP address.
System will not add current IP address.
You cannot add two or more devices in the Manual Add interface (Figure
4- 28.). Click OK button, system connects to the corresponding front-end
device of current channel on the interface.
means connection successful.
Figure 4- 27
means connection failed.
316