Table of Contents
Advertisement
Step 4
Set filter object. Once the object is smaller than the min size or larger than the
max size, there is no alarm.
1.
After draw the rule, set max size and min size.
2.
Click Draw target to draw the rectangle zone.
Note
Each rule can set two sizes (min size/max size). Please make sure the max
size is larger than the min size.
The default max size is the full screen, you can select the blue line and then
use mouse to adjust.
Step 5
Set parameters.
Parameter
Function
It is to set intrusion mode.
Action
When the action mode is cross, there are three options: A->B, B->A, both.
Direction
System can generate an alarm once there is any object enter/exit (Or both)
the zone.
Figure 5- 81
Cross: It includes enter the warning zone, leave the warning zone or
cross the warning zone.
Appear: An object falling from nowhere (such as from the sky). It may not
fully enter the warning zone.
552
Advertisement
Table of Contents
