Rider Information Center; Mode Information Displays - Polaris RANGER XP 1000 2018 Service Manual

RIDER INFORMATION CENTER

The rider information
center is located in the
instrument cluster. All
segments will light up for
one second at start-up.
If the instrument cluster
fails to illuminate, a battery
over-voltage may have
occurred and the
instrument cluster may
have shut off to protect the
electronic speedometer. If
this occurs, your POLARIS
dealer can provide proper
diagnosis.
The information center is
set to display standard
units of measurement and
a 12-hour clock at the
factory. To change to
metric and/or a 24-hour
clock.
q Gear This indicator displays gear shifter position
Indicator .H = High Gear
L = Low Gear
N = Neutral
R = Reverse Gear
P = Park
– = Gear Signal Error (or shifter between gears)
AWD This indicator shows whether 2X4 or AWD is
w
Indicator
active.
Service A flashing wrench symbol alerts the operator
e
Indicator that the preset service interval has been
reached. Your POLARIS dealer can provide
scheduled maintenance. See Programmable
Service Interval, page 11.17 for resetting
instructions.
Fuel The segments of the fuel gauge show the level
r
Gauge
of fuel in the fuel tank. When the last segment
clears, a low fuel warning is activated. The
outline of the fuel display will flash. Refuel
immediately.
Speed This vehicle may be equipped with a maximum
t
speed limitation function. This would be
Limitation
(if displayed on the screen as "LIM" followed by
equipped) the speed. "LIM 30" for example.
9928487 R01 - 2018 RANGER XP 1000 Service Manual
© Copyright Polaris Industries Inc.

MODE INFORMATION DISPLAYS

The rider information
center contains three areas
that display mode
information.
q
Area 1 Modes
Engine Temperature
Vehicle Speed
Tachometer
w
Area 2 Modes
Odometer
Trip Meters (T1/T2)
Engine Hours
Service Hours
Trip Time
e
Area 3 Modes
Clock
ELECTRICAL
Description
Temperature of engine
coolant
Speed of vehicle
Engine speed (RPM)
Description
The odometer records
and displays the distance
traveled by the vehicle.
A trip meter records the
distance traveled by the
vehicle if reset before
each trip. To reset, see
Trip Meter, page 11.17.
Total hours of engine
operation since
manufacture
A flashing wrench symbol
indicates that the preset
service interval has been
reached. To reset, see
Programmable Service
Interval, page 11.17.
Time length of vehicle
operation since mode was
last reset
Description
The clock displays time in
a 12-hour or 24-hour
format. To reset, see
Clock, page 11.16.
11
11.15