Pvt Inner Cover Assembly - Polaris RANGER XP 1000 2018 Service Manual

10. If necessary, remove the outer slip-fit post and install
the Drive Clutch Puller (PN PU-52422) to remove the
Stationary Sheave.
WARNING
Engine and Transmission must be supported before
proceeding.
11. Remove Transmission Support fasteners
i
12. Remove three bolts that retain the inner clutch
cover to the engine. Remove bolts
secure the clutch cover to the transmission.
NOTE
The transmission will need to be lowered until sufficient
clearance is gained to remove the lowest mounting bolt
o
.
13. Remove the inner clutch cover from the vehicle.
9928487 R01 - 2018 RANGER XP 1000 Service Manual
© Copyright Polaris Industries Inc.

PVT INNER COVER ASSEMBLY

1. Inspect the inner clutch cover. Replace if cracked or
damaged.
2. Inspect the seal
Replace if damaged.
u
.
3. Inspect inner clutch cover seal (engine side). Replace
if cracked, torn or damaged.
o a
and that
PVT SYSTEM
q
on the transmission input shaft.
5
5.13