Polaris RANGER XP 1000 2018 Service Manual page 347

4. Assemble the reverse shaft assembly and input shaft
assembly if previously
illustrations).
ITEM DESCRIPTION
q Bearing
Engagement Dog
w
e Retaining Ring
r
Washer
t Low Gear (67T)
y Needle Bearing
u
Reverse Shaft
i Gear (48T)
Engagement Dog
o
Gear (49T)
a
s Bearing
d
Washer
f Bearing
g
Chain
h Input Shaft
Bearing
j
9928487 R01 - 2018 RANGER XP 1000 Service Manual
© Copyright Polaris Industries Inc.
5. Install the idler gear shaft assembly
disassembled (see cluster assembly
at the same time.
6. Install the rear output shaft assembly
output shaft assembly to align slots with engagement
dog. Ensure bearing is fully seated upon assembly.
7. Assemble shift shaft rail if previously disassembled.
Both shift forks need to be orientated the same way, so
that the shift fork pins are both offset to the same side
TRANSMISSION
r
and gear
t
into the transmission housing, all
y
. Rotate
NOTE
of the rail.
6
6.27