Engine Removal - Polaris RANGER XP 1000 2018 Service Manual

ENGINE REMOVAL

1. Disconnect the battery.
2. Drain coolant and engine oil. See Engine Oil and
Filter Replacement, page
Replacement, page 2.41.
3. Remove rear cargo box. See Cargo Box Removal,
page 10.24.
4. Disconnect Ignition Coil.
5. Disconnect oxygen sensor
w
6. Remove three fasteners
shield to the head pipe. Remove the upper heat
shield.
IMPORTANT
DO NOT remove large heat shield secured to the close
off panel.
9928487 R01 - 2018 RANGER XP 1000 Service Manual
© Copyright Polaris Industries Inc.
2.34 and Coolant
q
.
retaining the upper heat
ENGINE / COOLING / EXHAUST
e
7. Remove six fasteners
the cylinder head.
8. Remove the thermostat housing hose
t
water pump hose .
9. Disconnect stator harness and disconnect the
harness retainer from the engine mount.
10. Disconnect the fuel supply
IMPORTANT
Place a shop towel around the fuel line to catch any
dripping fuel.
retaining the head pipe to
r
and the
y
at the fuel rail.
3.21
3