Balance Shaft Removal/Inspection - Polaris RANGER XP 1000 2018 Service Manual

ENGINE / COOLING / EXHAUST
16. Remove the eight M10
lower crankcase bolts. Discard the eight M10 bolts.
17. Tap on the lower crankcase in reinforced areas with a
soft faced hammer to loosen. Carefully lift up and
remove the lower crankcase half.
3.46
k l
, two M8 and one M6
j
BALANCE SHAFT REMOVAL / INSPECTION
1. Perform Crankcase Disassembly / Inspection, page
3.44 procedure.
2. Note timing marks on balance shaft and crankshaft
drive gears. Shafts must be properly timed upon
assembly.
3. Carefully rotate the balance shaft
from the crankcase.
4. Inspect the balance shaft gear teeth for damage.
9928487 R01 - 2018 RANGER XP 1000 Service Manual
w
and remove it
© Copyright Polaris Industries Inc.