Crankcase Disassembly/Inspection - Polaris RANGER XP 1000 2018 Service Manual

ENGINE / COOLING / EXHAUST
CRANKCASE DISASSEMBLY / INSPECTION
1. Remove the four screws retaining the oil cooler
the crankcase.
2. Remove the crankcase drain plug
remaining in the engine. Reinstall the plug.
3. Remove the oil filter.
4. Install the Cylinder Holding & Camshaft Timing Plate
e
(PU-50563) onto the cylinder. The cylinder holding
tool retains the cylinder and pistons when the engine
is rotated.
5. Rotate engine to access the crankcase sump cover.
3.44
6. Remove the thirteen M6
retaining the sump cover
q
to
7. Remove the sump cover
w
. Drain any oil
8. Remove and clean oil pump pick-up
9. Remove the three bolts
to the crankcase.
t
and three M8 bolts
r
to the crankcase.
u
from the crankcase.
o
that retain the oil pump
9928487 R01 - 2018 RANGER XP 1000 Service Manual
© Copyright Polaris Industries Inc.
y
i
.
a