Trunkback/Golfback/ Clip-In Stake Bed Leg Pocket; Mirror - Center Rear View - Polaris GEM E Series Service Manual

TRUNKBACK/GOLFBACK/
CLIP-IN STAKE BED LEG
POCKET
DESCRIPTION
The Trunkback/Golfback has two legs that fit into
pockets mounted on each frame rail.
Fig. 27 TRUNKBACK/GOLFBACK/CLIP-IN
STAKE BED Leg Pocket
1 - Mounting bolt
2 - Pocket
3 - Frame rail
REMOVAL
1. Remove Trunkback/Golfback/Clip-In Stake Bed.
See Trunkback/Golfback/Clip-In Stake Bed in
this section.
2. Remove the two 3/8" Tek screws attaching
pocket to upper rear frame rail.
3. Remove pocket.
INSTALLATION
1. Position pocket on upper rear frame rail.
2. Install the two 3/8" Tek screws.
3. Mounting bolts.
4. Install Trunkback/Golfback/Clip-In Stake Bed.
See Trunkback/Golfback/Clip-In Stake Bed in
this section.
November 2007
MIRROR - CENTER REAR
VIEW
DESCRIPTION
The center rear view mirror assembly is mounted in
the center of the upper windshield support. It is not
serviceable and is replaced as a unit.
REMOVAL
1. Remove the 2 Phillips head screws at either
end of the mounting bracket.
2. Remove the Phillips head screw in the center of
the mounting bracket.
3. Remove the mirror assembly.
INSTALLATION
1. Position mirror assembly on upper windshield
support.
2. Install short (3/8") Phillips head screw in center
hole of mounting bracket.
3. Install 2 long (3/4") Phillips head screws in
either end holes of mounting bracket.
BODY 7 - 26
GEM Service Manual