Rear A-Arm Service; Rear Upper A-Arm Removal - Polaris RANGER XP 1000 2018 Service Manual

STEERING / SUSPENSION

REAR A-ARM SERVICE

REAR UPPER A-ARM REMOVAL

1. Properly lift and support the vehicle by the frame.
2. Using a 13 mm socket, remove the four nuts retaining
the rear stabilizer bar to the frame.
q
3. Remove the nut
stabilizer bar link.
4. Remove the four wheel nuts and remove the wheel.
5. Remove the fastener
the rear shock to the lower A-arm.
8.18
from the lower portion of the
w
retaining the lower portion of
6. Remove the fastener
A-arm to the bearing carrier.
r
7. Drill out the rivet retaining the brake line clamp to
the upper A-arm.
8. Using a 15 mm socket and open-end wrench, remove
t
the two fasteners retaining the upper A-arm to the
frame.
9. Allow the lower A-arm to drop and remove the upper
A-arm by maneuvering the rear shock and stabilizer
link out.
9928487 R01 - 2018 RANGER XP 1000 Service Manual
e
and nut retaining the upper
© Copyright Polaris Industries Inc.