Shift Cable Service/Inspection; Shift Lever Removal/Installation - Polaris RANGER XP 1000 2018 Service Manual

SHIFT CABLE SERVICE
SHIFT LEVER REMOVAL / INSTALLATION
1. Remove the shift knob cover
w e
screw and shift knob
2. Remove the four push rivets retaining the upper dash
panel and remove the panel to access the shift lever.
3. Remove the rubber grommet
r
shift lever .
s
4. Remove nut retaining the shift cable
r
lever . Disconnect cable end from the lever.
5. Remove the retaining ring
r
off the mounting bracket and out from the frame.
a
6. Remove both bushings
service as needed.
7. Perform the previous steps in reverse order to
reinstall the shift lever (lever, cable, dash panel, shift
knob).
9928487 R01 - 2018 RANGER XP 1000 Service Manual
© Copyright Polaris Industries Inc.
q
. Remove retaining
r
from the shift lever .
t
from the dash and
i
to the shift
o
and slide the shift lever
from the shift lever and
SHIFT CABLE INSPECTION
Shift cable adjustment may be necessary if symptoms
include:
• No gear position or AWD display on instrument cluster
• Ratcheting noise on deceleration
• Inability to engage into a gear
• Excessive gear lash (noise)
• Gear selector moving out of desired range
Inspect shift cable, clevis pins, and pivot bushings and
replace if worn or damaged.
TRANSMISSION
6
6.5