Lower Dash Panel Removal - Polaris RANGER XP 1000 2018 Service Manual

LOWER DASH PANEL REMOVAL

1. Disconnect the ignition, headlight and AWD switches,
instrument cluster, and both 12V power points on the
control dash panel.
2. Remove the shifter cap and remove the T-25 Torx-
head screw and pull up on the shifter grip to remove
it.
q
3. Remove the two rivets on the bottom of the control
dash panel and un-clip the top clips to remove the
panel.
4. Remove the six plastic rivets
storage compartment and remove lower storage
compartment.
9928487 R01 - 2018 RANGER XP 1000 Service Manual
© Copyright Polaris Industries Inc.
5. Remove the seven T-40 Torx and four T-25 Torx
screws
r
retaining lower
6. Remove the four push rivets
dash
7. Remove the five T-40 Torx
dash to the body.
8. Tilt the steering wheel to its lowest position and put
the gear selector in Low or High gear to ease
removal.
9. Carefully pull the lower dash panel towards the seat
and up to remove it.
BODY / FRAME
t y
retaining the lower dash .
u
on top of the main
i
bolts retaining the main
10
10.33