Rider Information Display; Information Display Area - Polaris Ranger RZR SW Service Manual

Table of Contents

Advertisement

ELECTRICAL

Rider Information Display

The rider information display is located in the instrument
cluster. All segments will light up for 1 second at start-up.
NOTE: If the instrument cluster fails to illuminate:
• A battery over-voltage may have occurred and
the instrument cluster may have shut off to
protect the electronic speedometer.
• The Blackout Switch may be turned on.
1.
Vehicle Speed Display - Analog display of vehicle speed
in MPH or km/h.
2.
Information Display Area - Odometer / Trip Meter /
Tachometer / Engine Temperature / Engine Hours /
Service Info / Clock - LCD display of the service hour
interval, total vehicle miles or km., total engine hours, a trip
meter, engine RPM and engine temperature.
3.
MPH / KM/H Display - MPH is displayed when the
instrument cluster is in the Standard mode. KM/H is
displayed when the instrument cluster is in the Metric
mode.
4.
High Beam Indicator LED icon illuminates whenever the
Headlamp switch is in the high beam position.
5.
Fuel Level Indicator - LCD bar graph indicating current
fuel level. All segments will flash when the last segment is
cleared indicating a low fuel warning.
6.
Clock - Displays current time in either 12-hour or 24-hour
formats.
7.
Engine Temperature Indicator - LED icon illuminates
when the ECM determines the engine is overheating. The
indicators will initially flash to indicate the engine is
overheating. The indicators will stay lit and not flash if a
severe overheating condition exists.
8.
Service Interval Indicator - Preset at the factory and
adjustable by the user, a flashing wrench symbol alerts the
operator that the preset service interval has been reached
and maintenance should be performed. The wrench icon
will flash for 10 seconds upon start-up once it reaches 0.
9.
Check Engine MIL - Illuminated when the ECM has
detected a Diagnostic Trouble Code in the engine
management system.
10. AWD Indicator - Illuminated when the AWD / TURF
switch is in the AWD position.
11. TURF Indicator - Illuminated when the AWD / TURF
switch is in the TURF position.
10.10
12. Neutral Gear Indicator - LED icon illuminates when gear
selector is in the neutral (N) position.
13. Gear Position Indicator - Displays gear selector position.
H = High
L = Low
N = Neutral
R = Reverse
P = Park
-- = Gear Signal Error (shifter stuck between gears)
14. Power Steering System MIL - LED icon illuminates when
a fault has occurred with the power steering system. This
indicator illuminates when the key is turned to the ON
position and goes off when the engine is started.
15. Turn Signal / Hazard Lamp Indicator - LED icon
illuminates whenever the LH, RH or hazard lamps are
activated.
16. Helmet / Seat Belt Indicator - LED icon illuminates for
several seconds when the key is turned to the ON position.
The lamp is a reminder to the operator to ensure all riders
are wearing helmets and seat belts before operating the
vehicle.

Information Display Area

The LCD portion of the instrument cluster is the information
display area. Information displayed in this area includes:
odometer, trip meter, engine RPM, engine hours, service
interval, clock, engine Diagnostic Trouble Codes (DTCs) and
power steering DTCs.
Odometer
The odometer records and displays the total distance traveled by
the vehicle. The odometer can not be reset.

Advertisement

Table of Contents
loading

Table of Contents