Transmission Removal - Polaris RANGER XP 1000 2018 Service Manual

TRANSMISSION REMOVAL

CAUTION
Serious injury may result if machine tips or falls. Be
sure machine is secure before beginning this
procedure. Always wear eye protection.
1. Disconnect the (-) negative battery cable from the
battery.
2. Remove Cargo Box. See Cargo Box Removal, page
10.24
3. If internal transmission repair is required, drain the
transmission lubricant
Replacement, page 2.48.
4. Remove both rear drive shafts from the transmission.
Refer to Rear Drive Shaft Removal, page 7.43
procedure
5. Remove the outer clutch cover and belt. Refer to Belt
Removal, page 5.6 procedure.
6. Remove drive and driven clutch and inner clutch
cover. Refer to PVT Inner Cover Disassembly, page
5.12 procedure.
7. Remove the vent line from the transmission fitting
9928487 R01 - 2018 RANGER XP 1000 Service Manual
© Copyright Polaris Industries Inc.
(see Transmission Fluid
q
.
8. Place a shop towel around the fuel line to catch any
dripping fuel. Disconnect the fuel supply
rail.
9. Disconnect TMAP, CPS, Coolant Temp Sensor, Trans
Switch, Speed Sensor, Injectors, ETC.
TRANSMISSION
w
at the fuel
6
6.9