Polaris RANGER XP 1000 2018 Service Manual page 295

10. Install the two fastening nuts
11. Torque the clutch cover fasteners
TORQUE
Clutch Cover Fasteners
50 ft-lbs (68 Nm)
9928487 R01 - 2018 RANGER XP 1000 Service Manual
© Copyright Polaris Industries Inc.
u
. 12. Torque the mounting fasteners
i
.
13. Secure fuel line clip
14. Clean the inside of the drive clutch and the engine
15. Install the Driven Clutch assembly. Ensure the Driven
TORQUE
Transmission Mount to Engine Fasteners
37 ft-lbs (50 Nm)
a
to clutch cover.
crankshaft with alcohol. Allow parts to dry before
proceeding.
Clutch assembly is nearly flush with the Transmission
Input shaft.
WARNING
The Driven Clutch Bolt will engage the threads of the
Input Shaft without the Driven Clutch being fully mated
to the Input Shaft. Damage can occur to the clutch and
Input Shaft if the Driven Clutch is not flush with the
Input Shaft.
PVT SYSTEM
o
.
5
5.15