Sleep Rules (Models For Europe); Sleep Level (Energy Saver And Quick Recovery) (Models Except For Europe); Power Off Rule (Models For Europe) - Kyocera ECOSYS M5526cdn Operation Manual

Installing and Setting up the Machine > Energy Saver function

Sleep Rules (models for Europe)

You can set whether sleep mode operates for each function. When the machine enters sleep mode, the ID card cannot
be recognized.
For more information on Sleep Rules settings, refer to the following:
Sleep Rules (models for Europe) (page 8-39)
Sleep Level (Energy Saver and Quick Recovery)
(models except for Europe)
For sleep level, you can toggle between the following two modes: Energy Saver mode and Quick Recovery mode. The
default setting is Energy Saver mode.
Energy Saver mode reduces power consumption even more than Quick Recovery mode, and allows Sleep Mode to be
set separately for each function. The ID card cannot be recognized.
To resume, select the [Energy Saver] key on the operation panel. If print data is received during Sleep, the machine
automatically wakes up and starts printing.
For more information on Sleep Level settings, refer to the following:
Quick Setup Wizard (page 2-35)

Power Off Rule (models for Europe)

The Power Off Rule is used to stop the power from automatically turning off.
The default preset time is 3days.
For more information on Power Off Rule settings, refer to the following:
Power Off Rule (models for Europe) (page 8-40)
2-33