Table of Contents
Advertisement
Wiring for Strobe Illumination (NPN)
Warning: Contact between Pin 5 (gray wire) and any ground or voltage source less than
or equal to 3.5VDC may cause erratic operation in this configuration. Contact between Pin
5 (gray wire) and any voltage source greater than 3.5VDC will damage the illuminator.
Smart Series Illuminator
Connector
Smart Series Illuminator
Pin
Signal Name
1
+24VDC
2
Trigger –
3
DC Ground
4
Trigger +
5
Dim
* Insulate Pin 5 (gray wire)
MicroHAWK MV-20 / MV-30 / MV-40 Smart Camera Guide
MicroHAWK MV-40 External Illumination Control and Wiring
MicroHAWK MV-40
Connector A
MicroHAWK (Connector A)
Pin
to
2
to
6
to
7 and 12
Ground and Output Common
to
2
to
No Connection*
Signal Name
Power
Output 3
Power
N/A
4
4-9
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MicroHAWK MV-20 and is the answer not in the manual?
Questions and answers