Power Synchronized Unit Connection; Power Cord Connection - Fujitsu ETERNUS AF250 S2 Configuration Manual

Chapter 4 Connecting Cables
4.3

Power Synchronized Unit Connection

2
Connect the controller enclosure to the drive enclosure.
(1)
Connect Controller 0 first.
Connect the DI (OUT) port of Controller 0 (CM#0) in the controller enclosure to the DI (IN) port of
I/O module 0 (IOM#0) in the drive enclosure with the mini SAS HD cable between enclosures.
Drive
enclosure
Controller
enclosure
(2)
Connect Controller 1 next.
Connect the DI (OUT) port of Controller 1 (CM#1) in the controller enclosure to the DI (IN) port of
I/O module 1 (IOM#1) in the drive enclosure with the mini SAS HD cable between enclosures.
Drive
enclosure
Controller
enclosure
4.3 Power Synchronized Unit Connection
When using a power synchronized unit for power control, connect the power synchronized unit to the ETER-
NUS AF.
Refer to "Configuration Guide (Power Synchronized Unit)" for details about power synchronized units, the pro-
cedure for connecting power synchronized units to the ETERNUS AF, and required settings.
4.4

Power Cord Connection

Connect the power cords to the ETERNUS AF.
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
49
P3AG-1832-04ENZ0