Fujitsu ETERNUS AF250 S2 Configuration Manual page 149

Chapter 9 Advanced Copy Settings
9.2 Performing a Copy (SnapOPC+)
10
Use the same method to create sessions for the remaining six generations.
Specify from "No.: 3, Name: sdv1" through to "No.: 8, Name: sdv6" for the copy destination volumes.
11
After all of the sessions are created, click the number of sessions in [SnapOPC+ Sessions].
12
Check the status of the copy source volume and the copy destination volume.
In this case, the copy source volume number is "0" and the copy destination volume numbers are from
"1" through to "7".
13
Open [Disk Management] from [Computer Management].
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
149
P3AG-1832-04ENZ0