Fujitsu ETERNUS AF250 S2 Configuration Manual page 137

Chapter 8 SAN Connection Settings
8.2 Server Connection Setup
8
Check whether a file or other item can be created in the created drive.
■
SnapOPC+ Destination Settings
Set up the disk created in [Snap Data Volume].
1
During volume creation, right-click the disk created in [Snap Data Volume] and select [New Simple Vol-
ume].
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
137
P3AG-1832-04ENZ0