Chapter 1 Component Names; Controller Enclosure; Front; Figure 1.1 Front View Of A Controller Enclosure - Fujitsu ETERNUS AF250 S2 Configuration Manual

Chapter 1
Component Names
This chapter provides the component names of the ETERNUS AF.
1.1

Controller Enclosure

An operation panel and drives are installed in the front of the ETERNUS AF (controller enclosure). Controllers
and power supply units are installed in the rear.
1.1.1

Front

This section provides the names of the components in the front of a controller enclosure.

Figure 1.1 Front View of a Controller Enclosure

1 2
3
1. Operation panel
2. Drive
3. Flange cover
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
17
3
P3AG-1832-04ENZ0