Fujitsu ETERNUS AF250 S2 Configuration Manual page 126

Chapter 8 SAN Connection Settings
8.2 Server Connection Setup
17
On the [iSCSI Initiator Properties] screen, confirm that [Status] has changed to [Connected].
18
In the same way, repeat
Initiator IP: IP address of the server (B in
Target portal IP: IP address of the ETERNUS AF (D in
Step 11 and later steps for the other target.
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
Figure 8.1)
Figure 8.1)
126
P3AG-1832-04ENZ0