Chapter 4
Connecting Cables
4.4
Power Cord Connection
4.4.2
When 1U Power Distribution Unit Is Installed (for Regions other than the
EMEIA, Central American, and Caribbean Regions)
The following procedure explains how to connect the power cord when a 1U power distribution unit is instal-
led.
To help with power cord management and prevent incorrect connections, attach labels to the power cords
and make a note of connection origins and destinations.
1
Remove the power cord clamp from the power distribution unit.
Power distribution unit
Do Not
•
Do not use the server service outlet to connect a power cord for the ETERNUS
AF.
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
51
Power cord clamp
P3AG-1832-04ENZ0