Fujitsu ETERNUS AF250 S2 Configuration Manual page 117

Chapter 8 SAN Connection Settings
8.1 Connection Settings for the ETERNUS AF
(2)
Select "Host Group" or "All" in "Target Connection".
To allow all of the hosts to recognize the LUN group, select "All".
• When "Host Group" is selected
Select a host group that is to be associated, and click the [OK] button.
When "All" is selected
•
Select a host response and click the [OK] button.
(3)
Click the [Browse] button in [CA Port Group].
A screen to select the CA port group appears.
(4)
Select the CA port group that is to be associated and click the [OK] button.
The name of the selected CA port group is displayed in "CA Port Group".
(5)
Click the [Browse] button in [LUN Group].
A screen to select the LUN group appears.
(6)
Select the LUN group that is to be associated and click the [OK] button.
The name of the selected LUN group is displayed in "LUN Group".
4
Check the path between the host and the host interface port on the ETERNUS AF in [Host - CA Port Con-
nection], and click the [Create] button.
A confirmation screen appears.
5
Click the [OK] button.
The host affinity is created and the registration completion screen appears.
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
117
P3AG-1832-04ENZ0