Chapter 5
General Settings
5.7
RAID Configuration Settings
A confirmation screen appears.
4
Click the [OK] button.
The volume is created and the registration completion screen appears.
5
Click the [Done] button.
The screen display returns to the [Volume] screen.
6
Then, create SDV and SDPV in the backup RAID group (RG1).
For the creation procedure, refer to
and
"5.7.4 Copy Data Destination Volume (SDPV) Creation" (page
"5.7.3 Generation Management Volume (SDV) Creation" (page 79)
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
80).
78
P3AG-1832-04ENZ0