Fujitsu ETERNUS AF250 S2 Configuration Manual page 39

Chapter 3 Checking the Configuration Environment
3.2 Server Connection Preparation
4
The currently set initiator name is displayed.
Click the [Change] button.
5
On the [iSCSI Initiator Name] screen, specify the initiator name and click the [OK] button.
To leave the initiator name unchanged, click the [OK] button.
To use the default initiator name, also click the [Change] button.
This allows you to continue to use this initiator name even after changing the "server name".
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
39
P3AG-1832-04ENZ0