Chapter 3 Checking The Configuration Environment; System Configuration Example; Figure 3.1 System Configuration Example - Fujitsu ETERNUS AF250 S2 Configuration Manual

Chapter 3
Checking the Configuration Environment
This manual explains how to configure the system with the ETERNUS AF, taking a basic configuration as an
example.
3.1

System Configuration Example

This section describes the procedure for the following system configuration as an example.
iSCSI interface connection
•
Multipath connection using the ETERNUS Multipath Driver
•
Event notification (SNMP trap transmission, email notification, syslog notification, and remote support) via
•
LAN
Generation management of data by acquisition of backup based on the day of the week with generation
•
copy using SnapOPC+
■
Configuration Diagram
The following diagram shows a system configuration example.

Figure 3.1 System Configuration Example

Server
SNMP manager
iSCSI SAN
LAN for Operation Management
Mail server
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
ETERNUS AF
Multipath
PC for Operation
Management/
PC for setup
Syslog server
34
Remote support center
P3AG-1832-04ENZ0