Fujitsu ETERNUS AF250 S2 Configuration Manual page 75

Chapter 5 General Settings
5.7 RAID Configuration Settings
The procedure to register a RAID group is as follows:
1
On the navigation of the ETERNUS Web GUI screen, click the [RAID Group] tab.
The [RAID Group] screen appears.
2
In [Action], click [Create].
The [Create RAID Group] screen appears.
3
Enter the name of the RAID group that is to be registered. Select "Manual" for "Create Mode".
4
Set the required items and click the [Create] button.
Name: RG0
Create Mode: Manual
RAID Level: High Performance (RAID1+0)
Controlling CM: Automatic
Drives: Select four
Do Not
Do not uninstall the drives that are installed by default or move them to any other
•
slot.
Contact your sales representative or maintenance engineer if drives that are instal-
led by default need to be uninstalled or moved to another slot.
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
75
P3AG-1832-04ENZ0