Remote Support (By Ais Connect) Setup - Fujitsu ETERNUS AF250 S2 Configuration Manual

Chapter 6 Monitoring Settings
6.3 Remote Support Setup
6.3.1

Remote Support (by AIS Connect) Setup

When using the remote support function by AIS Connect, perform the environment settings for connecting to
the remote server (AIS Connect server) in the remote support center.
• If the REMCS function is being used, temporarily stop the REMCS function.
In the EMEIA, Central American, and Caribbean regions, the "Log Transmission" setting for the "Set E-
•
Mail Notification" function may be enabled ("Yes" is displayed). If this setting is enabled, disable it (se-
lect "No").
1
On the navigation of the ETERNUS Web GUI screen, click [System].
The [System] screen appears.
2
In [Category], click [AIS Connect] in [Remote Support].
The [Remote Support] screen appears.
3
Perform the environment settings for the AIS Connect function.
(1)
In [Action], click [Setup AIS Connect Environment].
The [Setup AIS Connect Environment] screen appears.
(2)
Select "Enable" for "AIS Connect" and then "Country code : Country name" for "Country of Installa-
tion (Country Code : Country Name)". Perform the other additional settings that are required.
(3)
Click the [Set] button.
A confirmation screen appears.
(4)
Click the [OK] button.
The AIS Connect settings are applied.
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
97
P3AG-1832-04ENZ0