Safety Tips - FP postbase Operator's Manual And Parts List

4
PostBase mailing system with Dynamic Scale
1

Safety tips

The PostBase with Dynamic Scale is a digital mailing system with ink-jet print
technology for metering mail. The PostBase with Dynamic Scale complies with
the pertinent safety regulations for office information equipment.
Please observe the following tips for your own safety:
Prevention of electrical hazards
• Operate the PostBase mailing system only on a grounded single-phase power
socket. Make sure your office power supply conforms to the power requirements
indicated on the serial number plates.
• Make sure the sockets for connecting the mailing system are close by and easily
accessible at all times.
• Unplug the plugs of all mailing system components in case of an emergency.
Call the Customer Support.
• Take special care that no foreign objects penetrate the mailing system's interior.
• Be extremely careful when handling liquids.
• When filling with sealing liquid, make sure not to wet any parts connected to the
mains.
• Unplug the plugs of all components prior to cleaning the PostBase mailing system.
Prevention of mechanical hazards
• Keep long hair, fingers, loose clothing pieces, neck ties, shawls, jewelry and the like
away from moving machine parts.
• Do not remove any parts of the housing.
• Do not remove any equipment related to safety or protection. Do not make them
inoperative or unable to function.
Accessories and consumables
• We recommend to use only approved FP equipment and FP original parts. The
manufacturer FP has established reliability, safety and applicability.
The manufacturer cannot assess the reliability, safety and applicability for products
not approved by FP, and therefore not vouch for such products. The full functioning
of the PostBase mailing system at the time of delivery can only be guaranteed
when using original Francotyp-Postalia ink cartridges.
• Use the supplied power and connection cables or cables that have been approved
by Francotyp-Postalia. Make sure that cables are not damaged.