FP postbase Operator's Manual And Parts List page 16

16
PostBase mailing system with Dynamic Scale
Slot, long
Catches
Mounting the weighing platform
• Hold the weighing platform such that the
long slot in the weighing platform foot
points to the front.
• Place the weighing platform onto the scale
receptacle from above. The long slot of the
weighing platform must slide in the coun-
terpart on the scale receptacle.
• Press down slightly on the weighing plat-
form with your flat hand.
Assembling the catch tray
• Attach the stop to the catch tray:
Slide the stop into the guides on the catch
tray bottom.
• Place the catch tray next to the franking
machine.
• Slightly lift the franking machine on the
right side. The bottom side of the housing
features slots where the attachments are
fastened.
• Push the catch tray underneath the frank-
ing machine such that the catches engage
in the slots.
• Put the franking machine carefully down.