Step 9: Filling The Sealant Tank With Sealing Liquid - FP postbase Operator's Manual And Parts List

27
Installation and commissioning
Step 9: Filling the sealant tank with sealing liquid
Warning! Be extremely careful when handling
liquids. If you fill the sealant tank, make sure
not to wetten any parts connected to the
mains. If this should happen, immediately
pull the power plugs. Have the PostBase
mailing system checked by the Customer
Support before using it again.
On the Feeder plus The sealant tank is located below a transpar-
ent flap. To open the flap:
• Press the release button.
• Remove sealant tank out of the housing.