Safety Tips - FP optimail 30 Operator's Manual

1

Safety tips

The optimail 30 is a digital franking machine with a thermal printer for franking
letter mail. The optimail 30 complies with the pertinent safety regulations for office
information equipment.
Please observe the following tips for your own safety:
• Install and commission the optimail 30 according to the instructions in the Installa-
tion Guide.
• When you move the optimail 30 from a cold environment (i.e. below 10°C / 50°F):
Wait at least 24 hours before connecting the optimail 30. The optimail 30 requires
this period to adapt to the ambient conditions.
• Use only the power and modem cables provided or approved by Francotyp-
Postalia. Make sure that cables are not damaged.
• Only operate the optimail 30 on a grounded single-phase power socket. Make sure
your office power supply conforms to the power requirements shown on the serial
number plate of the optimail 30.
• Make sure the socket for connecting the optimail 30 is close by and easily
accessible at all times.
• Do not remove any parts of the housing.
• Never cover the ventilation slots in the housing.
• Switch off the optimail 30 before cleaning the franking machine or moving it to
another location.
• Make sure that no liquids or foreign objects penetrate the interior of the optimail 30.
If this happens, pull out the power plug immediately. Have the optimail 30 checked
by a service technician before using it again.
• Pull out the power plug in the event of danger! Call the Francotyp-Postalia after-
sales service.
• Only use original ribbon cassettes from Francotyp-Postalia. Observe the
information enclosed with every package.
• Only use the batteries provided by Francotyp-Postalia. Observe the instructions
enclosed with the battery for correct use and disposal.
• Only have maintenance and repair work done by qualified personnel authorised by
Francotyp-Postalia. Otherwise your warranty will be voided. You will be liable for
any damages.
7
Safety tips