FP postbase Operator's Manual And Parts List page 41

Sensor
Sensors
On the Ramp plus
The sensor for the letter detection on the
Ramp plus is freely accessible.
• Remove the dust from the sensor with a
few puffs of the compressed air spray.
On the Feeder plus
• Press the release button. The roller trans-
port moves upwards.
The sensors in the letter receiving wall are
now accessible from the front (operator side).
• Remove the dust from the sensors with a
few puffs of the compressed air spray.
• Press down firmly on the roller transport
until it clicks into place.
Maintenance and care
41