FP postbase Operator's Manual And Parts List page 42

42
PostBase mailing system with Dynamic Scale
Letter transport sensors
On the Dynamic Scale
• Fold the hood upwards.
The two sensor windows for the letter width
detection, the reflector surface inside the
hood and the three letter transport sensors
are now accessible for cleaning with the com-
pressed air spray.
Cleaning sensors in the letter receiving tray:
• Remove the dust from the sensor windows
Cleaning the reflector surface in the hood:
Sensor window
• Remove the dust from the reflector surface
Cleaning the letter transport sensors:
• Remove the dust from the sensors with a
If all sensors on the Dynamic Scale have
been cleaned:
• Fold the hood down.
with a few puffs of the compressed air
spray.
with a few puffs of the compressed air
spray.
few puffs of the compressed air spray.
Note: The third sensor is located on the
right, behind the transport roller.