FP postbase Operator's Manual And Parts List page 37

Top edges
Light barrier
• Align top edges flush:
• Align the front edges in the same way.
Front edges
Recommendation for optimum separation:
Stagger the letter stack in the running direc-
tion, so that the bottom letter is furthest for-
wards.
Positioning the letter stack – starting
processing
• Lift the press-down bar. You can pivot the
• Position the prepared letter stack at the
• Lightly slide the letter guide against the let-
Letter guide
To do so, position the letter stack with the
letter top edges on a level surface, loosen
up and jog to align.
press-down bar up fully and to the left, into
the retaining position.
Ramp plus as follows:
– Do not lay in the light barrier (letter
detection).
– Side to be printed (address side)
facing up.
– The letter top edges lie on the contact
area.
– Permissible stack height not exceeded.
The max marking on the contact area
indicates the permissible stack height.
ter stack and release. The letter guide
automatically springs back slightly, and
prevents the letters from jamming in this
way.
37
Franking