Power Supply Units; Power Supply Specifications - Panasonic fp2/fp2sh User Manual

Parts and Functions
2.7

Power Supply Units

2.7 Power Supply Units
2.7.1

Power Supply Specifications

Parts Terminology and Functions
POWER LED
1
Turns on when power is applied.
Power supply terminal
2
is the terminal for power supply wiring. Uses M3 crimping (pressure connection)
terminals ( section 4.2.1).
Ground terminal
3
To minimize effects from noise and prevent electrical shocks, connect this terminal
to ground.
Alarm output terminal
4
Contact output terminals of the relay which turns on when the ALARM LED of the
CPU turns on. Normally closed contact (N.C.) and normally open contact (N.O.) are
available.
Unit installation screw
5
Temporary holding hook
6
2 − 28
FP2/FP2SH