Basic Backplane H Type (Fp2−Bp**Mh) - Panasonic fp2/fp2sh User Manual

FP2/FP2SH
2.1.2 Basic Backplane H Type (FP2−BP**MH)
2
1
7
5
6
Parts Terminology and Functions
Backplane mounting holes
1
for mounting the backplane to the control panel. Use M4 screw for the mounting.
Unit guides
2
Align the tab on the unit with this guide when installing the unit to the backplane.
From the left side of the backplane, install the power supply unit, CPU, I/O units,
and intelligent units, in this order.
Connector for various units
3
Install various unit.
DIN rail attachment lever
4
allows attachment to a DIN rail.
Unit installation holes
5
for installing the unit to the backplane. Use the screw supplied with the unit for
installation.
Connector for power supply unit
6
Connector for expansion cable
7
for more details regarding the cable connecting, refer to section 4.1.3.
Connector for CPU unit
8
The position to install the CPU unit is fixed.
Type of Backplane
Type Use
11-module type Basic system only
Note
The color of letters on the printed board is yellow to make easier
to distinguish the FP2 backplane H type from the FP2 backplane.
8
Number of module
11
Parts and Functions
2.1 Backplane and Expansion Cable
4
Part number Weight
FP2−BP11MH Approx. 470g
3
2 − 5