Special Data Registers For Fp2/Fp2Sh/Fp10Sh/Fp3 - Panasonic fp2/fp2sh User Manual

11.1.3 Special Data Registers for FP2/FP2SH/FP10SH/FP3

FP2/FP2SH/FP10SH/FP3 (A: Available, N/A: Not available)
Address
FP2/
FP3 FP2SH
FP10SH
DT9000 DT90000
DT9001 DT90001
DT9002 DT90002
DT9003 DT90003
Name
The self-diagnostic error code is stored
Self-diagnostic here when a self-diagnostic error occurs.
error code Monitor the error code using decimal
display.
Not used -
Communication
The slot number, where an erroneous
error of
unit is installed, can be monitored here.
MEWNET-TR
"1" (on) is set in the bit position
corresponding to the slot number when
master unit (slot
one of the errors below id detected.
No. 0 to 15)
Communication error MEWNET-TR
(Available PLC:
master unit
FP3/FP10SH)
When a communication error occurs at
Position of
the MEWNET-TR master unit, the bit
abnormal I/O
corresponding to the slot no. of the unit
slot (slot No. 0
will be set on "1". Monitor using binary
to 15)
display.
(Available PLC:
(1: erroneous MEWNET-TR master unit,
FP2/FP2SH)
0: normal)
Communication
Position of abnormal I/O slot
error of
When an error occurs at an I/O unit, the
MEWNET-TR
bit corresponding to the slot of the unit
master unit (slot
will be set on "1". Monitor using binary
No. 16 to 31)
display.
(Available PLC:
(1: error, 0: normal)
FP3/FP10SH)
Position of
abnormal I/O
slot (slot No. 16
to 31)
(Available PLC:
FP2/FP2SH)
Descriptions
Read- Writ-
ing ing
A N/A
N/A N/A
A N/A
11-29