Panasonic fp2/fp2sh User Manual page 315

FP2/FP2SH/FP10SH/FP3 (A: Available, N/A: Not available)
Address
FP2/
FP3 FP2SH
FP10SH
DT9238 DT90238
DT9239 DT90239
DT9240 DT90240
DT9241 DT90241
DT9242 DT90242
DT9243 DT90243
DT9244 DT90244
DT9245 DT90245
DT9246 DT90246
DT9247 DT90247
DT9248 DT90248
DT9249 DT90249
DT9250 DT90250
DT9251 DT90251
DT9252 DT90252
DT9253 DT90253
DT9254 DT90254
- DT90255
- DT90256
Note) For MEWNET-W system, available PLC type: FP2/FP2SH/FP3/FP10SH
For MEWNET-P system, available PLC type: FP3/FP10SH
Name
Send WACK
Send WACK
Send answer
Send answer
Unidentified command
Counts how many times a parity error is
detected.
End code receiving error
Format error
Not support error
Self-diagnostic result
Counts how many times loop change is
MEWNET-
detected.
W/-P link
Available PLC: FP3, FP10SH
status
Counts home many times link error is
[W/P link 3]
detected.
(*Note)
Counts how many times main loop break is
detected.
Available PLC: FP3, FP10SH
Counts how many times sub loop break is
detected.
Available PLC: FP3, FP10SH
Loop reconstruction condition
Available PLC: FP3, FP10SH
Loop operation mode
Available PLC: FP3, FP10SH
Loop input status
Available PLC: FP3, FP10SH
Monitoring
tool port
station No. Station number BCD (H1 to H32) set for tool
(Available
port is stored here.
PLC: FP2SH/
FP10SH)
Monitoring
COM port
station No. Station number BCD (H1 to H32) set for tool
(Available
port is stored here.
PLC: FP2SH/
FP10SH)
Descriptions
Read- Writ-
ing ing
A N/A
A N/A
11-47