Panasonic fp2/fp2sh User Manual page 326

Name Boolean
Special setting instructions
Communica- SYS1
tion condi-
tions setting
Password
setting
Interrupt
setting
PLC link time
setting
MEWTOCOL-
COM
response
control
High-speed
counter
operation
mode
changing
System SYS2
registers
"No. 40 to
No. 47"
changing
: Available, : Not available,
*1) With FP-X Ver2.0 or later, and FPΣ Ver 3.10 or later, the baud rate can be selected from 300, 600 or 1200 bps.
*2) With FPΣ 32k type, the 8-digit password can be selected.
*3) With FPΣ 32k type and FP-X Ver1.10 or later, it can be used.
11-58
Symbol
Change the communication conditions
for the COM port or tool port based on
the contents specified by the character
constant.
Change the password specified by the
PLC based on the contents specified by
the character constant.
Set the interrupt input based on the
contents specified by the character
constant.
Set the system setting time when a PLC
link is used, based on the contents
specified by the character constant.
Change the communication conditions of
the COM. port or tool port for
MEWTOCOL-COM based on the
contents specified by the character
constant.
Change the operation mode of the high-
speed counter, based on the contents
specified by the character constant.
Change the setting value of the system
register for the PLC link function.
: Not available partially
Description
*1 *1
*2
13
*3 *3
7