Panasonic fp2/fp2sh User Manual page 307

FP2/FP2SH/FP10SH/FP3 (A: Available, N/A: Not available)
Address
FP2/
FP3 FP2SH
FP10SH
DT9123 DT90123
DT9124 DT90124
DT9125 DT90125
DT9126
DT90126
(*Note)
DT9127
DT90127
(*Note)
DT9128
DT90128
(*Note)
DT9129 DT90129
DT9130 DT90130
DT9131 DT90131
Note) Used by the system.
Name
Not used
Not used
Not used
Forced on/off
operating station
display
MEWNET-F
system remote
I/O service time
Not used
Not used
MEWNET-F
(remote I/O)
slave stations
abnormality
checking (for
selecting the
display contents
and master of
DT9132 to
DT9135/DT90132
to DT90135)
Descriptions
-
-
-
This displays the unit number that has
executed forced on/off operation.
The number of times, which
MEWNET-F remote I/O service was
performed by each master, is stored.
The number of times, which
MEWNET-F remote I/O service was
performed by each master, is stored.
-
-
The contents displayed by DT9132 to
DT9135/DT90132 to DT90135 will
change depending on the contents of
stored in DT9131/DT90131. Use the
programming tools software to write
the settings for what you want to
display (this can also be done with the
F0 (MV) move instruction).
Set the code (H0 or H1) specifying the
display contents in the higher 8 bits
and set the code (H0 to H3) specifying
the display master in the lower 8 bits.
Read- Writ-
ing ing
N/A N/A
A N/A
N/A N/A
A N/A
11-39