Wiring For Power Supply Units - Panasonic AFP7PSA1 User Manual

4.2.2 Wiring for Power Supply Units

 Terminal layout for power supply units
 Power supply voltage
Confirm that the connected voltage is within the allowable range of the power supply.
Model
number
AFP7PSA1
AFP7PSA2
 Power supply cable
Use power supply wire that is thicker than 2 mm
 Suitable wires
Suitable wires
AWG22 to 14 (0.3 mm
 Suitable crimp terminal
M3 terminal screws are used for the terminal. Use the following solderless terminals for wiring
to the terminals.
Fork type terminals
 Suitable crimp terminal
Manufacturer
J.S.T. Mfg Co.,Ltd
(Note) Use wire that is thicker than 2 mm
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Rated input Allowable voltage
voltage
100 to 240 V AC 85 to 264 V AC
100 to 240 V AC 85 to 264 V AC
Screwing
torque
2 2
to 2.0 mm ) 0.5 to 0.6 N·m
Round type terminal
Shape Part no.
Ring type 2-MS3
Fork type 2-N3A
2
.
4.2 Wiring the Power Supply
Rated output
range capacity
24 W
43 W
2
(AWG14) to minimize the voltage drop.
Suitable wires
2
1.04 to 2.63 mm
Rated output
current
1 A
1.8 A
4-9