Panasonic fp2/fp2sh User Manual page 313

FP2/FP2SH/FP10SH/FP3 (A: Available, N/A: Not available)
Address
FP2/
FP3 FP2SH
FP10SH
DT9195 DT90195
DT9196 DT90196
DT9197 DT90197
DT9198 DT90198
DT9199 DT90199
DT9200 DT90200
DT9201 DT90201
DT9202 DT90202
DT9203 DT90203
DT9204 DT90204
DT9205 DT90205
DT9206 DT90206
DT9207 DT90207
DT9208 DT90208
DT9209 DT90209
DT9210 DT90210
DT9211 DT90211
DT9212 DT90212
Note1) For FP10SH/FP3, using H mode
For FP2/FP2SH, using W2 mode
Note2) For MEWNET-W system, available PLC type: FP2/FP2SH/FP3/FP10SH
For MEWNET-P system, available PLC type: FP3/FP10SH
Name
The link status for the MEWNET-H link is
MEWNET-H
monitored as:
link status/
link unit
number (H
link 1)
(*Note1)
The link status for the MEWNET-H link is
MEWNET-H
monitored as:
link status/
link unit
number (H
link 2)
(*Note1)
The link status for the MEWNET-H link is
MEWNET-H
monitored as:
link status/
link unit
number (H
link 3)
(*Note1)
Not used
-
Not used
-
Station number, where the send area
address for the PC(PLC) link is overlapped
with this station, is stored here.
Test result in the optical transmission path
test mode for MEWNET-P link system is
stored here.
Counts how many times a token is lost.
Counts how many times two or more tokens
MEWNET-
are detected.
W/-P link
Counts how many times a signal is lost.
status
[W/P link 2]
Counts how many times a synchronous
(*Note2)
abnormality is detected.
Send NACK
Send NACK
Send WACK
Send WACK
Send answer
Send answer
Unidentified command
Descriptions
Read- Writ-
ing ing
A N/A
N/A N/A
A N/A
11-45