Panasonic fp2/fp2sh User Manual page 309

FP2/FP2SH/FP10SH/FP3 (A: Available, N/A: Not available)
Address
FP2/
FP3 FP2SH
FP10SH
DT9136 DT90136
DT9137 DT90137
DT9138 DT90138
DT9139 DT90139
DT9140 DT90140
DT9141
DT90141
(*Note1)
DT9142
DT90142
(*Note1)
DT9143
DT90143
(*Note1)
DT9144
DT90144
(*Note1)
DT9145
DT90145
(*Note1)
DT9146
DT90146
(*Note1)
DT9147
DT90147
(*Note1)
Note1) Used by the system.
Note2) When the system register 46 = K0, First: PC(PLC) link 0, second: PC(PLC) link 1
When the system register 46 = K1, First: PC(PLC) link 1, second: PC(PLC) link 0
Note3) For MEWNET-W system, available PLC type: FP2/FP2SH/FP3/FP10SH
For MEWNET-P system, available PLC type: FP3/FP10SH
Name
Display the error conditions for 8 types of
errors using 1 byte.
Error code
of
MEWNET-F
(remote
I/O) system
Not used
-
Not used
-
The number of times the receiving operation
is performed (counted using ring counter)
The current interval between two receiving
operations: value in the register x 2.5 ms
The minimum interval between two receiving
MEWNET-
operations: value in the register x 2.5 ms
W/-P
The maximum interval between two receiving
PC(PLC)
link status operations: value in the register x 2.5 ms
[PC(PLC)
The number of times the sending operation is
link 0
performed (counted using ring counter)
(W/P)]
The current interval between two sending
(*Note2, 3)
operations: value in the register x 2.5 ms
The minimum interval between two sending
operations: value in the register x 2.5 ms
The maximum interval between two sending
operations: value in the register x 2.5 ms
Descriptions
Read- Writ-
ing ing
A N/A
N/A N/A
N/A N/A
11-41