Cpu With Ic Memory Card Interface (Fp2-C2P/Fp2−C3P) - Panasonic fp2/fp2sh User Manual

Parts and Functions
2.4 FP2SH CPU
2.4.2 CPU with IC Memory Card Interface (FP2-C2P/FP2−C3P)
Parts Terminology and Functions
Status indicator LEDs (
1
display the operating condition and error statuses.
IC memory card access LED
2
Illuminates when data is being read from or written to the IC memory card.
IC memory card slot
3
is used when installing an optional IC memory card.
IC memory card eject button
4
Pressing this button ejects the IC memory card.
Initialize/test switch (
5
Setting the switch to the "INITIAL" side clears errors and initializes the operation
memory. Setting the switch to the "TEST" side puts the PLC in the test operation
mode.
Mode selector (
6
is used to change the operation mode of the PLC.
This is used to switch between the RUN, REMOTE, and PROG. modes.
IC memory card access enable switch
7
Setting this switch to the "on" (upward) side enables data to be read and written
to the IC memory card.
COM port (RS232C) (
8
is used to connect a computer or general−serial devices .
Tool port (RS232C)
9
is used to connect a programming tool.
2 − 20
page 2 − 9)
page 2 − 9)
page 2 − 10)
page 2 − 11)
FP2/FP2SH
next page