Xstatus Video Input Connector [N] Signalstate; Xstatus Video Input Connector [N] Sourceid; Xstatus Video Input Connector [N] Type; Xstatus Video Input Mainvideosource - Cisco TelePresence DX70 Reference Manual

Cisco TelePresence DX70 and DX80

Introduction

xStatus Video Input Connector [n] SignalState

Shows the signal state for the specified input.
Unknown: The signal format is unknown.
OK: A signal is detected and the signal format is supported.
Unsupported: A signal is detected, but the signal format is not supported.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
OK/Unknown/Unsupported
Example:
xStatus Video Input Connector 1 SignalState
*s Video Input Connector 1 SignalState: OK
** end

xStatus Video Input Connector [n] SourceId

Shows the identifer of the input source that the connector is associated with.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
Integer
Example:
xStatus Video Input Connector 1 SourceId
*s Video Input Connector 1 SourceId: 1
** end

xStatus Video Input Connector [n] Type

Shows which connector type it is.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
Composite/DVI/HDMI/Unknown/YC
Example:
xStatus Video Input Connector 1 Type
*s Video Input Connector 1 Type: HDMI
** end
D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xCommand

xStatus Video Input MainVideoSource

Returns the local video input currently used as the main source. The default main video source
is set with the xConfiguration Video DefaultMainSource command.
Requires user role: ADMIN, USER
Value space of the result returned:
Literal (1 / 2 / 3 / 4)
Example:
xStatus Video Input MainVideoSource
*s Video Input MainVideoSource: 1
** end

xStatus Video Input Source [n] ConnectorId

Shows the identifier of the connector that is associated with the input source.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
Integer
Example:
xStatus Video Input Source 1 ConnectorId
*s Video Input Source 1 ConnectorId: 1
** end

xStatus Video Input Source [n] FormatStatus

Shows the resolution format status for the video input source.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
Ok/OutOfRange/NotFound/Interlaced/Error/Unknown
Example:
xStatus Video Input Source 1 FormatStatus
*s Video Input Source 1 Resolution FormatStatus: Ok
** end
189
API Reference Guide
xStatus xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.