Video Configuration; Xconfiguration Video Defaultmainsource; Xconfiguration Video Input Connector [1 - Cisco TelePresence DX70 Reference Manual

Cisco TelePresence DX70 and DX80

Introduction

Video configuration

xConfiguration Video DefaultMainSource

Define which video input source to be used as the default main video source when you start a
call.
Requires user role: ADMIN, USER
Default value: 1
USAGE:
xConfiguration Video DefaultMainSource:
where
DefaultMainSource
: 1
Set the source to be used as the default main video source.
xConfiguration Video Input Connector [1..2] CameraControl Mode
Define whether a camera can be controlled or not. This value is fixed for both Connector 1
(integrated camera) and Connector 2 (HDMI), and cannot be changed.
Requires user role: ADMIN, INTEGRATOR
Default value: Off
USAGE:
xConfiguration Video Input Connector
where
n
: Unique ID that identifies the video input connector. Range: 1..2
Mode
: Off
Off: Disable camera control.
D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xConfiguration
DefaultMainSource
n CameraControl Mode: Mode
xCommand
xConfiguration Video Input Connector [1..2] CameraControl CameraId
The camera ID is a unique identifier of the cameras that are connected to the video input.
Requires user role: ADMIN, INTEGRATOR
Default value: 1
USAGE:
xConfiguration Video Input Connector
where
n
: Unique ID that identifies the video input connector. Range: 1..2
CameraId
: 1
The camera ID is fixed and cannot be changed.
xConfiguration Video Input Connector [1..2] InputSourceType
Select which type of input source is connected to the video input.
Note that Connector 1 is the system's integrated camera.
Requires user role: ADMIN, INTEGRATOR
Default value: Connector 1: camera Connector 2: PC
USAGE:
xConfiguration Video Input Connector
where
n
: Unique ID that identifies the video input connector. Range: 1..2
InputSourceType
: Connector 1: camera Connector 2: PC/camera/document_camera/
mediaplayer/whiteboard/other
Camera: Use this when a camera is connected to the video input.
Document_camera: Use this when a document camera is connected to the video input.
Mediaplayer: Use this when a media player is connected to the video input.
PC: Use this when a computer is connected to the video input.
Whiteboard: Use this when a whiteboard camera is connected to the video input.
Other: Use this when the other options do not match.
84
API Reference Guide
xStatus Appendices
n CameraControl CameraId: CameraId
InputSourceType:
n InputSourceType
Copyright © 2017 Cisco Systems, Inc. All rights reserved.